HES 50
High Early Strength Cement Grout
Greenz HES 50 Rapid Setting High Early Strength Cement Grout is a Class-C one-component cement powder which requires only the addition of water to form a high early quick setting non-shrink grout. Suitable for civil engineering applications, where a rapid and high early strength is required. It incorporates specially graded aggregates and advanced new generation polymers to form a cementations grout. Firms in approximately 20 minutes.
Greenz HES 50 Rapid Setting High Early Strength Cement Grout is a Class-C one-component
cement powder which requires only the addition of water to form a high early quick setting non-shrink
grout. Suitable for civil engineering applications, where a rapid and high early strength is required. It
incorporates specially graded aggregates and advanced new generation polymers to form a
cementitious grout. Firms in approximately 20 minutes.
Advantages and Solution
Rapid Setting Firms in 20 minutes
High Early Strength, Non-Shrink
Pre-mix – just add water
Anti-corrosion properties
Alkali resistant performance
Balustrading Installation,
Filling Voids & Gaps in Concrete
Stanchions, Columns & Posts
Installing Drains & Grates
Concrete, Stone, Masonry Embedment
Mixing Instructions
1. Greenz HES 50 Grout must be mixed with a power-driven mechanical mixer, such as a mortar mixer or For smaller
quantity mixing, an electric drill with a spiral mixing paddle DO NOT MIX BY HAND.
2. The water should be accurately measured and added to a suitable mixing container.
3. Place 80% of potable water into the mixing vessel.
4. Slowly add 70% of the powder to the mixing vessel and mix for 1 minute.
5. Add the final 20 % of potable water to the mixing vessel.
6. Slowly add the remainder of the powder to the mixing vessel.
7. Mix for 3 minutes or until uniform to a homogenised workable mix
Note: Do not add additional water as grout may segregate and bleed affecting performance