LH-180 NHO SSS
$595.00
Description
Laguna (High Strength) Gate Hinge
(For Doors 1000mm in width)
Key Features
Self-closing gate hinges designed to close gates up to 1000mm wide.
Suits 10 – 12mm glass thickness.
Adjustable closing speed.
External and internal application.
Hinges are non-hold open.
Glass to Glass.
Wall to Glass.
Right hand or Left Hand Opening.
316 Satin or Polished Stainless Steel Finish as standard.
These self closing hydraulic gate hinges are designed to close gates up to 1000mm wide in external
and in internal installations. They are designed to be used with the range of EGS Mag Latches for
pool gates. Hinges are Non Hold Open. The hinges are available in both glass to glass and glass to post/wall models and both models
are Non Handed, meaning they can be hung on either side of the gate opening.
Gaskets are provided so the glass gate and side panels can be 10mm or 12mm toughened glass.
1. Remove clip on covers and install the hinges. Ensure all clearances are correct.
2. If gate requires alignment, loosen allen keys on both hinges by 360° as per detail B. Set the door to correct alignment and
retighten allen screws.
3. To set closing speed, close slotted screws on both hinges then open both 1/4 of a turn. Then open or close slotted valves to obtain
required closing speed. Take care to ensure the valves of each hinge are synchronized so they close at equal speed.
4. Install clip on covers.